Engine Oil GTX Ultraclean 10W40 A3/B4 - 5 Liters / CASTROL - 15F8FC

The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book.

Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.

Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.

Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.

Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle.

Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.