Service Tools

Service Tools : Car Accessories always at low prices

45 products found
Price :
Sort by :    
 
OAKSON 937 OAKSON
Brake spring pliers
Pliers for brake shoe springs
View Product
€6.90 List Price €10.15 !
In stock
Shipped tomorrow
937
 
OAKSON 937 OAKSON
Set of 2 mount and demount spoons 300x20 - 410x25
Length: 330mm and 410mm
View Product
€13.20 List Price €18.01 !
In stock
Shipped tomorrow
937
 
BV Corporation 720 BV Corporation
Manual Clutch and brakes bleeder
This hose, comes complete with check valve, offers huge advantage of the individual to serve only brake circuit without having a return of air on every feedback from the pedal.
The Universal bleed screw allows you to adapt to almost all the screws détrier market vehicles, cars, boats, bikes, quad, etc.
This kit includes a flexible purge and detailed instructions.
Simple, effective and economical
View Product
€14.19 List Price €18.46 !
In stock
Shipped on Wednesday
720
 
OAKSON 937 OAKSON
Spring compressor (x 2)
Length 270 mm
Tool for compressing suspension springs
View Product
€20.20 List Price €29.86 !
In stock
Shipped tomorrow
937
 
OAKSON 937 OAKSON
3 jaw gear puller 100 mm
Opens up to 100 mm
View Product
€23.20 List Price €33.71 !
In stock
Shipped tomorrow
937
 
OAKSON 937 OAKSON
Ball joint separator
Allows for the extraction of ball joints with an axis up to 20mm
View Product
€26.40 List Price €39.56 !
In stock
Shipped tomorrow
937
 
AMPRO 936 AMPRO
Impact Screwdriver Kit
Impact Screwdriver Kit : loosens screws, nuts and rusty or blocked bolts
Ratchet mechanism for screwing and unscrewing
Contains: 1 impact screwdriver, 6 valves: 4 Phillips: 2x36 mm, 2x80mm, 3x36mm, 10x36mm
View Product
€32.50 List Price €39.38 !
In stock
Shipped on Wednesday
936
 
OAKSON 937 OAKSON
Bearing separator
Bearing splitter
View Product
€35.90 List Price €51.40 !
In stock
Shipped tomorrow
937
 
SAM 915 SAM
Wrench for hydraulic brake fittings 12/13 mm
Its star-shaped opening allows for assembly and disassembly without completely removing the nut wrench in such a way that it can almost be used as a socket wrench and avoids repeated use
Opening: 12/13 mm
Length: 120 mm
Finish: black-oxide
View Product
€46.70 List Price €58.65 !
In stock
Shipped on Wednesday
915
 
SAM 915 SAM
Reaction plate No D
Finish: Chrome matt
View Product
€22.00 List Price €27.32 !
 
SAM 915 SAM
Brake piston rewind adaptor No C
Brake piston adapter N°C - Alfa, Audi, Ford, Lancia, VAG
Finish: Chrome matt
View Product
€22.00 List Price €26.35 !
 
SAM 915 SAM
Reaction plate No D-1
Finish: Chrome matt
View Product
€22.00 List Price €26.99 !
 
SAM 915 SAM
Chisel for bevelling axel nuts
High-strength heat-treated point
Length: 200 mm
Finish: Red gloss
View Product
€30.60 List Price €37.02 !
 
SAM 915 SAM
Left hand threaded piston rewind tool
Professional quality brake piston wind back tool
Can be used on a few specific European vehicles
Driver side
Finish: Chrome matt
View Product
€33.90 List Price €43.12 !
 
SAM 915 SAM
Tool for springs
Frontal pliers for the installation and removal of brake shoe springs
225 mm
Finish: black-oxide
View Product
€37.99 List Price €48.38 !
 
SAM 915 SAM
Right hand threaded piston rewind tool
Professional quality brake piston wind back tool
Can be used on most European and Japanese cars
Passenger side
Finish: Chrome matt
View Product
€39.70 List Price €53.16 !
 
SAM 915 SAM
1/2" long diesel injector socket 21 mm
1/2 square driveshaft
Size: 21 mm
Finish: Shiny polished chrome
View Product
€42.50 List Price €52.16 !
 
SAM 915 SAM
Wrench for hydraulic brake fittings 14 mm
Its star-shaped opening allows for assembly and disassembly without completely removing the nut wrench in such a way that it can almost be used as a socket wrench and avoids repeated use
Opening: 14 mm
Length: 120 mm
Finish: black-oxide
View Product
€45.60 List Price €57.28 !
 
SAM 915 SAM
Wrench for hydraulic brake fittings 10 mm
Its star-shaped opening allows for assembly and disassembly without completely removing the nut wrench in such a way that it can almost be used as a socket wrench and avoids repeated use
Opening: 10 mm
Length: 120 mm
Finish: black-oxide
View Product
€46.70 List Price €59.37 !
 
SAM 915 SAM
Wrench for hydraulic brake fittings 11 mm
Its star-shaped opening allows for assembly and disassembly without completely removing the nut wrench in such a way that it can almost be used as a socket wrench and avoids repeated use
Opening: 11 mm
Length: 120 mm
Finish: black-oxide
View Product
€46.70 List Price €60.90 !
 
SAM 915 SAM
3/8" key for adjusting steering ball joints 17 mm
Allows for faster alignment adjustments for OPEL: 17 mm
3/8 square driveshaft
Size: 17 mm
Finish: Paint
View Product
€47.10 List Price €63.03 !
 
SAM 915 SAM
3/8" key for adjusting steering ball joints 14 mm
Allows for faster alignment adjustments for AUDI: 14 mm
3/8 square driveshaft
Size: 14 mm
Finish: Paint
View Product
€47.10 List Price €63.86 !
 
SAM 915 SAM
Universal drive key with 3 pins 45 mm
Stabilising base equipped with 3 self-centering rounded prongs for use with a large number of vehicles
3 pin version: 40 + uses
3/8 square driveshaft that can be used with a hand socket wrench, pneumatic jack, right-handed or left-handed screw thread tool
2 rounded prongs mounted in an S-shaped rail that auto-adjust from 15 to 35 mm
Prong lock with 6 point 3mm screws; Up to 50Nms torque
Rounded steel plate with 50 mm diameter
Finish: black-oxide
View Product
€52.90 List Price €70.92 !
 
SAM 915 SAM
1/2 inch socket for Lambda sensor 22 mm
For use with probes to enable you to thread through lead wires, suitable for use with all kinds of vehicles
22 mm 6 point sockets; 3/8 or 6 point 22mm shaft
Exterior diameter: 32 mm; length : 82 mm
Finish: Shiny polished chrome
View Product
€52.90 List Price €65.73 !
 
SAM 915 SAM
Universal drive key with 2 pins 45 mm
Stabilising base equipped with 2 self-centring rounded prongs for use with a large number of vehicles
2 pin version: 1500 + uses
3/8 square driveshaft that can be used with a hand socket wrench, pneumatic jack, right-handed or left-handed screw thread tool
2 rounded prongs mounted in an S-shaped rail that auto-adjust from 15 to 35 mm
Prong lock with 6 point 3mm screws; Up to 50Nms torque
Rounded steel plate with 50 mm diameter
Finish: black-oxide
View Product
€53.90 List Price €67.77 !
 
SAM 915 SAM
Pliers for one-piece exhaust clamps
Allows you to open and keep monobloc exhaust clamps without damaging them
Prevents damage to the exhaust clamp enabling reuse
Jaw gap size 70 mm
Plier length 300 mm
For butt-joint exhaust clamps
View Product
€58.90 List Price €73.05 !
 
SAM 915 SAM
Pliers for handbrake cable
Suitable for Volkswagen, Audi, Seat, Skoda, Peugeot, Citroën, Renault Dacia, Nissan, Rover, etc.
225 mm
Finish: black-oxide
View Product
€60.90 List Price €76.43 !
 
SAM 915 SAM
Set of universal clutch alignment tools
Fast, universal alignment tool for classic clutch discs
Two diameters to enable alignment of all available clutches
View Product
€61.91 List Price €78.62 !
 
SAM 915 SAM
1/2" long diesel injector socket 22 mm
1/2 square driveshaft
Size: 22 mm
Finish: Shiny polished chrome
View Product
€63.90 List Price €85.58 !
 
SAM 915 SAM
1/2" long diesel injector socket 27 mm
1/2 square driveshaft
Size: 27 mm
Finish: Shiny polished chrome
View Product
€66.90 List Price €81.81 !
 
SAM 915 SAM
Screw spreader
Extender tool for rubber exhaust rings
For use with Volkswagen, Audi, Seat, Skoda only
Size: 150 mm
Finish: Shiny polished chrome
View Product
€72.90 List Price €86.94 !
 
SAM 915 SAM
Pipe end shaper
Enables quick restoration of exhaust pipes
Sizes: 15 - 100 mm
Finish: Shiny polished chrome
View Product
€77.90 List Price €101.16 !
 
SAM 915 SAM
Container for draining with screw attachment and flexible tube
Capacity 1.5 Litres
View Product
€84.89 List Price €102.26 !
 
SAM 915 SAM
12 point angled wrench for fuel injectors 17 mm
3/8 wrench for 17mm high pressure pump supply lines. 12 points
Enables you to install high pressure pump supply lines even in inaccessible locations; Enables tightening to torque of 20-30Nm
Cloth for applying to the injector
3/8 square driveshaft
Size: 17 mm
Finish: burnished marble
View Product
€93.90 List Price €122.95 !
 
SAM 915 SAM
12 point angled wrench for fuel injectors 14 mm
3/8 wrench for 14mm high pressure pump supply lines. 12 points
Enables you to install high pressure pump supply lines even in inaccessible locations; Enables tightening to torque of 20-30Nm
Cloth for applying to the injector
3/8 square driveshaft
Size: 14 mm
Finish: burnished marble
View Product
€94.89 List Price €115.36 !
 
SAM 915 SAM
3/8" key for adjusting steering ball joints 13 mm
Allows for faster alignment adjustments for SEAT: 13 mm
3/8 square driveshaft
Size: 13 mm
Finish: Paint
View Product
€97.90 List Price €116.36 !
 
SAM 915 SAM
Pneumatic brake caliper piston rewind tool
To push out brake caliper pistons effortlessly and in total safety
Pneumatic tool with 1/4 threaded inlet fitting
Raised band to allow for controlled pressure application to the brake caliper
The press shaft is equipped with 3/8 square driveshaft and a 2 pin adapter
Enables the installation of all available backing plates and flanges
Control handle for full command of the tool during use
Multi-brand, universal tool
Finish: Anodised aluminium
View Product
€101.91 List Price €122.24 !
 
SAM 915 SAM
Micrometre with counter for brake disks
Enables you to read the thickness of brake discs
Capacity: 0 - 25 mm
Certified accurate metrology tool
View Product
€123.90 List Price €163.52 !
 
SAM 915 SAM
Pneumatic brake fluid bleeder low pressure
Allows you to fill and bleed the brake system in less than 15 minutes
For use on breather screws; No air pockets thanks to vacuum
1.5L container with overflow valve
Minimum air pressure 5.5 Bars and maximum 9 Bars; Vacuum from -0.81 Bars to 7 Bars
View Product
€134.89 List Price €171.12 !
 
AMPRO 936 AMPRO
Set of piston rewind tools for pneumatic brakes
Includes: 1 pneumatic piston (reversible direction), 1 collection of flanges for various applications, 1 storage box
View Product
€147.90 List Price €176.36 !
 
SAM 915 SAM
Impact driver with set of 24 bits 5/16"
Professional toolbox with a full set of 5/16 bits
1 impact screwdriver; 1 1/2 socket” hexagonal bit holder 5/16”; 2 flat bits, 9 mm and 11 mm; 2 Phillips bits, N°2 and N°3; 2 Pozidriv bits, N°2 and N°3; 6 Torx bits; 6 Hex bits ; 5 XZN bits
Impact screwdriver: bare metal, coated body for comfort, with reversible tightening/loosening capability
Torx bits: T25/27/30/40/45/50
Hex bits: 4/5/6/7/8/10 mm
XZN bits: M5/6/8/10/12
Finish: Shiny polished chrome
View Product
€218.90 List Price €265.36 !
 
SAM 915 SAM
Kit including cages and shields for installing and removing wheel bearings
Easy and quick to use
The bearing removal kit allows you to: Remove the wheel bearing and replace it; Replace the wheel hub
Sizes: 55 to 91 mm
Can be used directly on the camshaft or on the press thanks to the flanges of varying diameters
Perfect for Volkswagen, Audi, Seat, Skoda, Opel, Fiat, Mercedes, Peugeot, Citroën, Renault, Nissan, Dacia, Ford, etc.
View Product
€264.91 List Price €333.21 !
 
SAM 915 SAM
Set of hub puller and hydraulic screw
3 to 5 pin positions
Supplied with: hub puller plate; diam 148.5 mm, height 90 mm; slide hammer axle: weight: 2.8 kg; universal joint hydraulic recoil screw
Capacity:12 T
View Product
€416.90 List Price €551.83 !
 
SAM 915 SAM
Brake caliper piston rewind tool with 21 adapters
Box containing 27 tools including a right-handed + left-handed brake piston wind back tool + reaction plate + 21 brake caliper adaptors
3/8 square driveshaft
Ideal for changing brake pads, fit the piston into the caliper housing and position the new brake pads correctly
Finish: burnished marble
View Product
€536.90 List Price €692.27 !
 
SAM 915 SAM
SAC system clutch alignment tools
Cars are increasingly fitted with SAC (Self Adjusting Clutch); These clutches are auto-adjusting; Thanks to their auto-adjusting mechanism, they compensate for play caused by clutch disc wear and tear
The SAC mechanism guarantees that de-clutching force is consistent over time and increases driver comfort
Suitable for most auto-adjusting SAC clutches (3 and 4 holes) found in the following vehicles: FIAT GROUP, VW, AUDI, BMW, MERCEDES, VOLVO, OPEL, RENAULT, PSA etc.
Benefits: Pre-tightening of the disc on the plate during assembly and disassembly to prevent the clutch from becoming bent; Alignment of the clutch disc
View Product
€631.90 List Price €813.79 !
All Our Car Accessories